TB / SELF-SERVICE

IPv6 TUNNEL BROKER

A tunnel broker for your own AS: free IPv6 BGP transit over GRE, SIT (6in4) or WireGuard. Bring your own ASN and IPv6 prefixes.

If your AS has IPv6 prefixes but no physical interconnect, reach AS202831 over an internet tunnel and announce your networks using BGP. This is free IPv6 transit for operators of their own AS, network labs and independent networks with their own resources.

The tunnel and IPv6 BGP transit are free within the stated limits. This broker does not allocate free IPv6 /48s or /64s, IPv4 prefixes or ASNs. Obtaining and maintaining your own resources is not included.

This is not a VPN for anonymous access or ready-to-use home IPv6 without BGP. WireGuard is a transport to the BGP neighbour here, not a standalone VPN service.

SELF-SERVICE · FREE

Register, verify your ASN and create a tunnel on the portal. Configs, BGP session state and accepted prefixes are available in your dashboard.

CREATE A TUNNEL
tunnel.as202831.network
WHAT'S INCLUDED
  • Your own ASN + IPv6 prefixes (BYO-ASN / BYO-prefixes)
  • GRE / SIT (6in4) / WireGuard
  • Up to 2 tunnels per ASN, 100 Mbit/s per tunnel by default
  • Default route ::/0 or IPv6 full view
  • Ready configs for Linux, MikroTik, VyOS, BIRD and FRR
  • BGP session state and accepted prefixes in the dashboard
PRICEFREE · BRING YOUR OWN RESOURCES
REQUEST A PORT

BEFORE YOU CONNECT

  • Your own ASN: prove ownership with a line in the RIPE DB aut-num or a code sent to the ASN abuse address.
  • Your own IPv6 prefixes with ROAs authorising your ASN and route6 objects in the RIPE DB.
  • Your own router or server supporting the chosen tunnel and BGP. GRE / SIT requires an external IPv4 address; WireGuard is an alternative transport. The tunnel endpoint must be reachable from AS202831.

PROTOCOLS AND ROUTES

GRE, SIT (6in4) and WireGuard are transport options. An IPv6 BGP session runs inside the tunnel. Choose the protocol that fits your network and equipment.

Receive either a default route ::/0 or the full IPv6 table (full view) from AS202831. Announce only your own authorised IPv6 prefixes. Free service limits: up to two tunnels per ASN, 100 Mbit/s per tunnel by default.

Need IPsec, transparent L2 or a custom interconnect? Those are separate L2 / L3 tunnels by arrangement, not features of the free broker.

CUSTOM L2 / L3 TUNNELS >>

HOW TO SET UP A BGP TUNNEL

  1. Register and add your ASN

    Open the portal and verify ASN ownership via RIPE aut-num or a code sent to the abuse address. Prepare ROAs and route6 objects for your prefixes.

  2. Choose a transport

    Create a GRE, SIT (6in4) or WireGuard tunnel and select ::/0 or full view. Use the parameters shown by the portal.

  3. Copy your configuration

    Copy a ready config for Linux, MikroTik or VyOS and BGP settings for BIRD or FRR; apply the appropriate variant on your equipment.

  4. Check BGP and prefixes

    After setup, check session state and accepted prefixes in the dashboard. If an announcement is not accepted, check your ASN, ROAs and route6 objects. Upstream filter updates via AS202831:AS-ALL may take up to a day.

TUNNEL BROKER FAQ

Can I get a free IPv6 prefix without an ASN?
No. This broker requires your own ASN and IPv6 prefixes. The tunnel and BGP transit are free, not address block allocation or ASN registration.
What are the free IPv6 transit limits?
Up to two tunnels per ASN and 100 Mbit/s per tunnel by default. GRE, SIT (6in4) and WireGuard are available, with a default route ::/0 or IPv6 full view.
Are ROAs and route6 objects required?
Yes. Announced IPv6 prefixes need ROAs authorising your ASN and route6 objects in the RIPE DB. ASN ownership is verified via RIPE aut-num or a code sent to the abuse address.
Is this a VPN or home IPv6 without BGP?
This is not a VPN or a home IPv6 prefix allocation service. You connect your own AS to IPv6 transit using BGP; your own ASN and prefixes are mandatory.
Where are configs and status available?
On tunnel.as202831.network: configs for Linux, MikroTik, VyOS, BIRD and FRR, BGP session state and accepted prefixes.
CREATE A TUNNEL
11 / CONTACT

GET IN TOUCH

Three addresses and one messenger. There is no eight-item phone menu.

EMAIL
TECHNICAL SUPPORT (NOC)
support@as202831.network
PEERING AND INTERCONNECTS
peering@as202831.network
TELEGRAM

Abuse reports are handled in order. A substantiated complaint with logs gets an answer; a template blast without detail does not.

CONNECTION REQUEST

Send your AS number, the bandwidth you want and the site — that is enough for a first reply.

The button opens your mail client with a pre-filled message to peering@as202831.network. Nothing is sent in the background.